I. application of stainless steel electric heating tube

The components shall be stored outside the dryer. If the insulation resistance drops below 1 megohm due to long-time storage, the components can be dried in an oven at about 200 ℃ for several hours (or pass the components through low voltage for several hours), that is, the insulation resistance can be restored. If carbon deposits are found on the surface of the pipe, they must be removed before reuse to avoid reducing efficiency or even burning the components. When melting asphalt, white wax and other solid oils, the voltage shall be reduced for application, and then rise to the rated voltage after melting. To prevent the electric quantity from converging and reducing the service life of components.

II. Functional advantages of stainless steel electric heating tube

The dry fired stainless steel electric heating tube is made of stainless steel, modified magnesium oxide powder, high resistance electric heating alloy wire, stainless steel heat sink and other materials through advanced production equipment and technology. Using the modified magnesia powder, the surface load of the dry fired electric heating tube can reach 7 w / cm2, which is 3 ~ 4 times that of the ordinary components.

The high temperature resistance of the modified magnesia powder can reach 700 ℃ or even higher, which makes the dry fired stainless steel electric heating tube have good insulation function and high heating efficiency, thus improving the service life of the electric heating tube. The dry burning electric heating tube also has the advantages of fast heating, uniform heating and good heat dissipation function.

Article source: heat pipe manufacturerhttp://www.gdtamman.com